The cold of winter is approaching here in Michigan and if you’re not ready it can be some harsh and chilly nights on the horizon. Getting your HVAC or furnace in Michigan ready for winter can be done quite quickly and without much hassle. By doing so you can ensure the unit is working properly. You can also make it much more energy efficient by doing some of these basic steps. Not only that but you can also find problems before they occur in the unit if you opt for an inspection of the HVAC system or furnace by an HVAC contractor in Michigan.
How to Prepare Your HVAC or Furnace in Michigan for Winter
Being able to test and locate problems with your HVAC or furnace can really help you before winter starts in full force. Once the temperature drops you’ll want to know that your HVAC system or furnace is working in good order and without any problems. By following the tips and advice below you can also ensure that your system is running in good energy efficient mode as well. Some of the tips listed below can not only help your system work better in terms of heating your home but it can also make it much more energy efficient. It can even help to extend the life of your system making it much more beneficial to do these tips.
Some of the tips listed below can not only help your system work better in terms of heating your home but it can also make it much more energy efficient. It can even help to extend the life of your system making it much more beneficial to do these tips.
Clean the Registers of the Unit
One thing that many home owners overlook is the registers in each room that the HVAC or furnace services. When there is problems with the registers which are the vents that allow air from the sytem to enter the room it can cause problems with the heating of the room. Many time registers can break or over time collect dust and debris which clogs them. There may also be components of the register that are broken causing the register to not allow air to pass through easily. You may need to replace the register if it is broken or bent. If there is debris you’ll also need to clean any dust or debris from the register. Cleaning the register with a vacuum can really help the air flow going through the register.
Check Out the Unit and Clear Any Surrounding Items
Sometimes the furnace is located in an area of the garage or basement. During summer and spring it’s a good possibility that items are placed around the furnace because it is not in use. When this happens be sure clear away any items that are stacked around or up against the furnace. You’ll also need to clear any items that are stacked on top of the system as well.
Change the Air Filters for Your System
Along with the registers for your system you’ll also need to check the air filter if it’s accessible. On some HVAC or furnace systems it is not accessible by the home owner so be sure to check the model of your unit to determine if you can or not. You may also need to contact an HVAC contractor to determine where and how to change the air filter as well. It’s best to change the air filter before you use the HVAC or furnace at your home and then every month thereafter. This will allow you to keep the air flowing in the system like it should and it can help the unit make it more energy efficient. This tip can help your unit not only work better and it can also make it save some energy usage.
Get an Inspection Done on the System
The best way to determine if your HVAC or furnace is running properly and the way it should be sure to get an HVAC or furnace inspection done before the winter. This can also help you locate problems with the system before they result in a failure of the system. Which can really be helpful when you have problem. Get ready for this winter in Michigan by getting an inspection on your system by a qualified HVAC contractor in Michigan.